When selecting wear-resistant steel plates, four key considerations should be considered: matching the wear type (abrasive, impact, or corrosive) with the material; matching the operating temperature with the material's thermal stability; matching the impact load with the material's toughness; and matching subsequent processing requirements with the material's weldability and machinability. Important considerations during use: Avoid prolonged high-temperature operation exceeding 300°C; preheat to 150-200°C before welding; and for steel plates thicker than 30mm, a multi-layer, multi-pass welding process is recommended.
Key Points for Selecting and Using Wear-Resistant Steel Plates
Aug 04, 2025
Leave a message
